Please enter the e-mail address provided during registration.
BOSTON | wall-mounted toilet with soft-close seat, 53 x 36 cm
Finish: gloss white (BP)
The OMNIRES BOSTON rimless toilet catches the eye with its assured, contemporary silhouette. The geometric design of the bowl, based on a cubic shape with gently rounded edges, creates a striking combination with a flat and slim soft-close seat.
White gloss is a classic finish with a gleaming surface naturally reflecting the light.
The rimless toilet incorporates a flushing technology that distributes water along the entire perimeter of the bowl, with every flush.
Thanks to its rimless form, the toilet is easy to clean.
Thanks to the innovative flushing technology, the water consumption is minimised.
The toilet seat incorporates silver ions with significant antibacterial properties.
The soft-close toilet seat closes discreetly, slowly and quietly.
Toilet seat with the clip-off system may be easily lifted off the toilet for cleaning purposes.
The toilet is made of the highest quality ceramic characterised by good hygienic properties.
The toilet seat is made of high quality, scratch-resistant duroplast.
The product has a 5-year warranty. Details of warranty terms.
Products made from M+ composite material and ceramics should be cleaned regularly, preferably after each use, so as to prevent the build-up of hard-to-remove dirt. For daily maintenance of external surfaces, use a soft cloth (for example, a microfibre cloth) and a solution of water with a mild cleaning agent with a natural composition, then rinse the product thoroughly with clean water and wipe it dry. It is not recommended to use rough or abrasive materials and corrosive or bleaching substances to prevent damaging the surface of the product.
For more stubborn dirt, use a 10% citric acid solution with water. Apply the solution to the product for 2 to 3 minutes. After that time, rinse the product thoroughly with clean water and wipe it dry. If necessary, the process can be repeated. Residues from hair dye, lipstick or other products with a dyeing effect should be removed from the surface immediately to prevent the formation of permanent marks.