Please enter the e-mail address provided during registration.
CONTOUR | wall-mounted bath spout
Finish: brushed anthracite (AT)
The product is coated using the advanced PVD technology which guarantees the highest possible durability and facilitates cleaning.
The product is made of high quality A-grade brass.
You should clean your bathroom and kitchen fittings regularly, preferably after each use, so as to prevent the build-up of hard-to-remove dirt. For daily maintenance of external surfaces, use a soft cloth (for example, a microfibre cloth) and a solution of water with a mild cleaning agent with a natural composition, then rinse the product thoroughly with clean water and wipe it dry. It is not recommended to use rough or abrasive materials and corrosive or bleaching substances to prevent damaging the surface of the product.
For more stubborn dirt, use a 10% citric acid solution with water. Apply this solution directly to the product or cover the product with a cloth soaked in the solution. After 10 minutes, rinse the product thoroughly with clean water and wipe it dry. If necessary, the process can be repeated.
Remember to regularly control the flow of water through the aerator so as to ensure its problem-free operation and protect it from damage. In the case of small contaminants in the water or “hard” water, remove the aerator once every few weeks and clean it with a brush. In the case of more stubborn dirt, we recommend soaking the aerator for 10 minutes in a 10% citric acid solution with water.
CONTOUR | wall-mounted bath spout
Finish: brushed anthracite (AT)
The product is coated using the advanced PVD technology which guarantees the highest possible durability and facilitates cleaning.
The product is made of high quality A-grade brass.
The product is coated using the advanced PVD technology which guarantees the highest possible durability and facilitates cleaning.
The product is made of high quality A-grade brass.
You should clean your bathroom and kitchen fittings regularly, preferably after each use, so as to prevent the build-up of hard-to-remove dirt. For daily maintenance of external surfaces, use a soft cloth (for example, a microfibre cloth) and a solution of water with a mild cleaning agent with a natural composition, then rinse the product thoroughly with clean water and wipe it dry. It is not recommended to use rough or abrasive materials and corrosive or bleaching substances to prevent damaging the surface of the product.
For more stubborn dirt, use a 10% citric acid solution with water. Apply this solution directly to the product or cover the product with a cloth soaked in the solution. After 10 minutes, rinse the product thoroughly with clean water and wipe it dry. If necessary, the process can be repeated.
Remember to regularly control the flow of water through the aerator so as to ensure its problem-free operation and protect it from damage. In the case of small contaminants in the water or “hard” water, remove the aerator once every few weeks and clean it with a brush. In the case of more stubborn dirt, we recommend soaking the aerator for 10 minutes in a 10% citric acid solution with water.
Paulina Shacalis, OMNIRES Studio
The OMNIRES CONTOUR collection intrigues with its extravagant form and decorative details. An austere architectural design with a diamond-cut milled surface captivates with its sophisticated combination of textures and perfect workmanship.
 (WDCONTOURAT) "Pinterest"){kind=small}
